News

News2021-04-22T10:02:16+00:00

Nitrogen Boosting Systems: Sizing, Applications and Selection

Nitrogen is the polite gas of industry: inert, dry, always available from a membrane or PSA generator - but almost never at the pressure the application wants. Generators deliver 6-10 bar; laser cutters want 20-30, accumulators 90-150, test rigs 200 and more. The bridge between those two numbers is a nitrogen boosting system, and sizing one correctly is mostly about [...]

By |November 20, 2026|Categories: Industry knowledge|Comments Off on Nitrogen Boosting Systems: Sizing, Applications and Selection

Fire Extinguisher Cylinder Testing: Requirements and Equipment

A fire extinguisher is the one pressure vessel in a building that everyone hopes never works. Cylinders sit for years in corridors and workshops, and the only proof they would actually hold pressure in an emergency is a documented hydrostatic test. For service companies, that test is also a business: requalification revenue, but also a compliance obligation with real technical [...]

By |November 17, 2026|Categories: Industry knowledge|Comments Off on Fire Extinguisher Cylinder Testing: Requirements and Equipment

Which Horizontal Valve Test Bench Spec Do 80% of Buyers Forget?

A valve test bench gets specified once and then runs for fifteen years. The pressure range gets argued over in every meeting. The control mode gets debated for weeks. Then the purchase order is signed, the bench is installed, and somewhere in the second year a QA auditor asks for the pressure-hold record from batch 17, and nobody can produce [...]

By |November 14, 2026|Categories: Company News|Tags: |Comments Off on Which Horizontal Valve Test Bench Spec Do 80% of Buyers Forget?

How Often Must Gas Cylinders Be Hydrostatically Tested? Intervals by Service

Every compressed gas cylinder carries a requalification date, and every inspector eventually meets a customer who asks why a cylinder that works perfectly still has to be taken out of service and filled with water. The answer is that hydrostatic testing is the only method that sees the cylinder the way pressure sees it - from the inside, across the [...]

By |November 13, 2026|Categories: Industry knowledge|Comments Off on How Often Must Gas Cylinders Be Hydrostatically Tested? Intervals by Service

The Complete Horizontal Valve Test Bench FAT and SAT Checklist (2026)

A repeat buyer at a refinery in Gujarat signs the FAT report, ships the bench, then discovers on site that the acceptance test protocol was written for a 0–35 MPa bench while the contract specified 0–180 MPa. The FAT passed. The SAT stalls for six weeks. Nobody cheated. The checklist simply never crossed the factory gate. That gap is where [...]

By |November 13, 2026|Categories: Company News|Tags: |Comments Off on The Complete Horizontal Valve Test Bench FAT and SAT Checklist (2026)

The Complete Horizontal Valve Test Bench Compliance Guide (API 598 & ISO 5208)

A horizontal valve test bench is the pressure-test station that proves a valve seats, seals, and holds before it ships. API 598 governs the shell and seat tests; ISO 5208 governs the leakage rate classes. Get either wrong and your acceptance certificate means nothing to the buyer on the other end. Most valve failures that reach a customer are not [...]

By |November 12, 2026|Categories: Company News|Tags: |Comments Off on The Complete Horizontal Valve Test Bench Compliance Guide (API 598 & ISO 5208)
Go to Top