The Manual Control Burst Pressure Test Machine is built for burst and proof-pressure testing. Clamping fixtures are quoted around the specimen, and the pressure curve is stored with the test ID.
Description
Whats is Manual Control Burst Pressure Test Machine
The Manual Hydraulic Burst Pressure Tester is a cost-effective hydro testing machine operated manually, but it retains the function of automatic pressure maintenance. When the preset test pressure is reached, the machine automatically stops and maintains pressure. However, during the test, you will need to manually time the test and unload the pressure. If you prefer a fully automated solution, our PLC or computer-controlled automatic hydraulic pressure testers would be a better option.
This tester uses water, hydraulic oil, or other liquids as the test medium and can generate hydraulic pressures up to 408 MPa. It injects the fluid at the required pressure into sealed components, simulating a high-pressure environment for hydrostatic tests, proof pressure tests, and burst pressure tests. It is suitable for testing a wide range of sealed components and pressure vessels, including hydraulic hoses, fire hoses, instruments, liquid cold plates, valves, joints, cylinders, gas tanks, and fire extinguisher cylinders.
To ensure accurate test results, it’s essential to remove air from the hydraulic testing circuit before starting the hydro test. For this purpose, we offer an optional electric water pump that helps quickly and efficiently bleed air from the system.
Hydraulic Burst Pressure Test Operation Process:
1.Preset the Testing Pressure: Start by adjusting the air regulator to set the desired testing pressure.
2.Apply Hydraulic Flow: The hydraulic pressure tester will deliver hydraulic fluid into the test object, then automatically stop and maintain the pressure.
3.Pressure Maintenance: Once the pressure is maintained, if there is no significant pressure drop after the set time, the test is considered successful for either the hydrostatic or proof pressure test.
4.Burst Pressure Test: For the burst pressure test, simply adjust the air regulator to the maximum setting. The hydraulic tester will continuously inject hydraulic fluid into the test object until it cracks. During this process, the burst pressure will be recorded by the pressure gauge.

The Burst Pressure Testing Machine has two operation modes: manual control and automatic control. The automatic control model provides higher accuracy and easier operation, making it perfect for users who prioritize convenience and have a larger budget. On the other hand, the manual control model offers a more economical solution without compromising reliability, making it a great choice for users with a limited budget.
Let us know your specific requirements or budget, and we’ll help you find the most suitable solution for your needs.
Typical uses of a burst pressure test bench
Design engineers iterate on wall thickness, material and crimp dimensions; every one of those iterations ends the same way — something has to be pressurised until it fails. The Manual Control Burst Pressure Test Machine is built for that daily cycle of sample, clamp, ramp, record. The typical workload here is control testing, so the clamping and detection settings are tuned for that from the factory; commissioning includes running your own samples to prove it.
- Medical and laboratory device shells — sterile fluid pathways proof-tested well above sterilisation and operating pressures.
- Third-party inspection and R&D — test houses and material laboratories that need a traceable pressure-versus-time curve for a report or a design iteration.
What makes this Manual Control Burst Pressure Test Machine practical is the way it handles the part: one clamping routine, one pressurisation recipe and one result file, test after test.
What to specify before we build yours
- Test medium — water, oil, glycol mixture or air; the choice changes the pump, the plumbing and the safety enclosure. It is set up here for the part.
- Recording requirement — whether you need a printed curve per sample, a database record, or only a pass/fail lamp. The setting here follows the part you run most.
What to look for in a burst pressure test bench
The bench you need is decided less by the pressure number and more by what happens around it — media, fixturing and records. Work through this list before ordering:
- Check how the result is captured. A manual gauge and a peak-hold pointer are enough for a pass/fail check. If the customer asks for a curve, you need a transducer, a sampling rate fast enough to catch the fracture, and software that exports the file in a format your report can use.
- Look at how the fixture treats the specimen ends. Crushed hose, slipped plugs and scratched faces produce failures that say more about the clamp than the part. A good fixture spreads the grip and keeps the ends free to move the way they will in service.
- Records for the part. The report is laid out with the fields your part standard asks for, so a result leaves the shop as a certificate rather than a rewrite job.
Frequently asked questions
How is the burst point detected automatically?
The controller samples pressure at a fixed rate and stops the test when pressure falls by more than a set percentage inside a short window, which is the signature of a fracture. A pressure-relief valve and a burst shield sit behind that logic so the test cell stays safe if the detection is late. With control testing as the main duty, we verify this point on your parts before the machine ships.
Is water always the medium for burst testing?
Water is the default because it is incompressible and safe, but it is not universal. Air or nitrogen is required when the part must stay dry, and oil when corrosion matters. Each medium changes the pump, the instrumentation and the safety provisions, which is why the medium is fixed at the design stage. On the Manual Control Burst Pressure Test Machine, that is part of the standard delivery, not an option.
Related equipment and further reading
- Hydraulic Pressure Burst Testing Machine
- tin can burst test bench
- Gas Pressure Burst Testing Machine
- The complete Burst Pressure Test Bench line-up
- Uses of a burst bench
- Inside a burst test bench
Bench or fixture questions we have not answered here? Write us the specimen and the standard — a configuration with pricing follows within one working day.
