Pipe Burst and Pressure Resistance Test Machine

The Pipe Pressure Resistance and Burst Test Machine is built for burst and proof-pressure testing. Clamping fixtures are quoted around the specimen, and the pressure curve is stored with the test ID.

Send Inquiry

Description

1. Application Scope of Pipe Pressure Resistance & Burst Test Machine

This pipe pressure burst tester is designed to measure the pressure failure duration under long-term constant internal pressure and constant temperature, as well as instantaneous burst pressure value of thermoplastic pipes and composite pipes. Applicable pipe types include PP-R, PP-B, PP-A, PE, PE-X, PVC, PVC-U, PVC-C, aluminum plastic composite pipes and other tubular products. It is essential testing equipment for plastic pipe manufacturers and inspection institutions, which can objectively reflect the product quality level of enterprises.

2. Compliant Test Standards

Conforms to two national standards:

  • GB/T 6111-2003: Test Method for Resistance to Internal Pressure of Thermoplastic Pipes for the Transport of Fluids
  • GB/T 15560-1995: Test Method for Hydraulic Instantaneous Burst and Pressure Resistance of Plastic Pipes for the Transport of Fluids

The system supports real-time pressure curve display, test report printing and experimental data storage via computer control.

3. Equipment Features of Pipe Pressure Resistance & Burst Test Machine

  1. Precise control of test pressure and temperature.
  2. Equipped with booster pump to realize stepless adjustment and accurate control of output pressure.
  3. All components adopt standard parts from world-famous brands with fully welding-free connections, featuring easy disassembly, convenient maintenance, safe operation and high efficiency.
  4. Multiple optional control modes, including manual control with digital pressure gauge display and computer automatic control.

 

4.Technical Parameters

1.Working Principle:The high-pressure pump generates high-pressure fluid according to set pressure values. The fluid is delivered to test specimens via high-pressure pipelines through the pressure control system to perform long-term static hydraulic tests on pipe workpieces.

2.Test Pressure:0~20MPa (customizable pressure range)
3.Pressure Control Accuracy:+2% of full scale upper limit, -1% of full scale lower limit
4.Pressure Resolution:0.1MPa
5.Sampling Frequency:1 time per second

6.Test Medium:Water
7.Operation Mode:Computer Control
8.Specimen Mounting Method:Thread connection + special tooling fixture
9.System Composition:Power system, circulation system, pressure control system, workpiece mounting device, computer control system
10.Application Scope:Testing for thermoplastic pipes, composite pipes and aluminum plastic composite pipes

Where a burst pressure test bench is used

Between a part that passed a hold test and a part that actually burst, there is a margin somebody is betting a shipment on. The Pipe Pressure Resistance and Burst Test Machine turns that bet into a measurement: pressure rises under control until the specimen gives, and the exact value is logged. This unit is laid out primarily for pipe resistance. If your sample list also covers other families, tell us — the pressure section is shared, only the fixture changes.

  • Aerospace and defence small components — compact actuators, reservoirs and tubing bundles with tight burst-margin documentation.
  • Compressed-air system components — receivers, dryers and distribution fittings checked against the relief-valve setting of the network.
  • Pipe extrusion and steel pipe mills — finished pipe sampled from every run to confirm the hoop-stress rating with a recorded failure curve.

What makes this Pipe Pressure Resistance and Burst Test Machine practical is the way it handles the pipe section: one clamping routine, one pressurisation recipe and one result file, test after test.

What to specify before we build yours

  • Recording requirement — whether you need a printed curve per sample, a database record, or only a pass/fail lamp. It is set up here for the pipe section.
  • Maximum test pressure and pressure-holding time — the bench is sized around your highest specimen rating plus a safety margin, not around the average. The setting here follows the pipe section you run most.

Selecting a burst pressure test bench for your line

Two quotations can quote the same maximum pressure and still be built for different jobs. Before you compare prices, pin down the points below:

  • Look at how the fixture treats the specimen ends. Crushed hose, slipped plugs and scratched faces produce failures that say more about the clamp than the part. A good fixture spreads the grip and keeps the ends free to move the way they will in service.
  • Think about who operates it. A laboratory bench used by engineers can be manual and flexible; a production fixture used by rotating operators should be one-button with automatic pass/fail and interlocks. Specify for the actual operator, not the ideal one.
  • Handling for the pipe section. Loading height, clamping force and the drain path are arranged for the pipe section you run most, which is where the daily minutes are won or lost.

Frequently asked questions

Do you supply the fixtures for our specific part, or only the bench?

The fixtures are part of the quotation. We size the clamping table, plugs and grips around the specimen drawings you send, and the first set is delivered fitted and tested on the bench. Later part families can be added as new fixtures without touching the pressure system. On this build the pipe section is the reference case, and the setting is proven with your samples at commissioning.

What is the difference between radial and axial clamping for hoses?

Radial gripping squeezes the hose cover and can allow a small slip at very high pressure; axial loading pulls the fittings apart the way service does. The right choice depends on what you need to learn — fitting retention or wall strength. Many labs keep both and pick per sample. On the Pipe Pressure Resistance and Burst Test Machine, that is part of the standard delivery, not an option.

Related equipment and further reading

If the parts you need to burst-test are not covered above, send a drawing or a photo with the test pressure and our engineers will come back with a fixture proposal within one working day.

Leave Us a Message

Have questions about this product? Fill in the form below and we will reply by email.

Go to Top